BM622 2010 CHANGE MAC
start > run > cmd > telnet 192.168.1.1
login: wimax
password: wimax820
ATP>setallmacaddr (mac address here)
ATP>setserialnum (18 digits serial here)
ATP>restoredef
BM622 2011 CHANGE MAC
1.PLUG YOUR MODEM IN TO THE COMPUTER W8 UNTIL CONNECTED TO YOUR PC
2.ENABLE MUNA NATIN TELNET SA ADMIN..
3.OPEN BM622 DECODER ,,,,LINK....CLICK ME
4.OPEN BROWSER TYPE 192.168.1.1 (ENTER) LOGIN: ADMIN PASS: UNG NA GENERATED NG BM622 DECODER
5.PAG PASOK NA SA ADMIN... PUNTA SA ACL TAPOS CHECK UNG TELNET SA LAN THEN APPLY.. (TELNET NA TAU)
6.GO TO CMD TYPE TELNET 192.168.1.1 THEN ENTER
7.LOGIN: Firefly PASS: $P4mb1h1r4N4m4nT0!! then enter
ATP>display allmacaddr (show base mac )
Current WAN Mac:XX:XX:XX:XX:XX:XX
Current Lan Mac:XX:XX:XX:XX:XX:XX
ATP>xiugai allmacdizhi XX:XX:XX:XX:XX:XX (input d2 present mac na lalagay mo ) Then enter
WAN MAC ADDRESS UPDATE SUCCESS xx:xx:xx:xx:xx:xx
LAN MAC ADDRESS UPDATE SUCCESS xx:xx:xx:xx:xx:xx
ATP>restoredef (enter)
BM622i 2010 CHANGE MAC
Login: wimax
Password: wimax820
ATP>diag set macaddr XXXXXXXXXXXX ( mac address na live ang ilalagay mo dyan)
set Lan mac address success
Lan mac address updated XXXXXXXXXXXX
set Lan Mac address Sucess
Wan mac address updated XXXXXXXXXXXX
ATP>diag reboot (para ma update ang mac live na nilagay mo)
BM622i 2011 CHANGE MAC
1st po download nyo to...
CLICK ME
2nd: connect nyo bm622i nyo sa pc
3rd run nyo yung firmware upgrader pero wag nyo po i upgrade..yaan nyo lang nakaopen..
4th: go to>start>run>cmd tpos type nyo telnet then enter
5th: after type nang >telnet< type nyo >open 192.168.254.1<
6th: LOGIN: Firefly PASS: $P4mb1h1r4N4m4nT0!! then enter
7th: ATP>xiugai macdizhi XX:XX:XX:XX:XX:XX (yan po yung mac na ilalagay nyo)
8th: ATP>diag reboot
BM622M FULL COMMAND IBA TO SA NILABAS SA SB
Login
user
0SlO051O
http://192.168.254.1/advanced/acl.html (to enable telnet)
start>run> telnet 192.168.254.1
login: Firefly
password: $P4mb1h1r4N4m4nT0!!
2nd level change mac (recommended to avoid Firmware Failure)
_____________________________________
sncfg dset WAN_MAC 00:00:00:00:00:00
sncfg dset LAN_MAC 00:00:00:00:00:00
touch /etc/factoryreset
reboot
_____________________________________
Config commands
*sacanset*
_______________________________
sncfg set WMX_FREQ_LIST 2622000
sncfg commit
_______________________________
optional: sncfg set WMX_FREQ_LIST 2622000,2602000
(depende na sayo kung ilang ferq ilagya mo)
*domain*
NAI / user id / pass
__________________________________________________________
sncfg set WMX_ANONYMOUS_ID 001E104E0B3F@globelines.com.ph
sncfg set WMX_USER_NAME wimaxbab@globetel.com.ph
sncfg set WMX_PASSW wimaxbab2008x2BJAOPOtVWC
sncfg commit
sncfg wimax disconnect
sncfg wimax connect
__________________________________________________________
note: (kung 34 at C8 series ang gagamitn mo na mac di mo na kailangan mag-set pa dito)
